What people hear more in daily life is cross recess, Phillips screw, and Y-shaped screw that everyone has not seen. It is one of the non-standard screws. It can be widely used in some small electronic products, and also needs to be disassembled with a special screwdriver. How can I remove the Y-shaped non-standard screws? Non-standard screw manufacturers come to chat with you:

Some people may ask, if there is no special screwdriver, what should I do if I need to disassemble it temporarily? In fact, you can use a flat-blade screwdriver that is one size smaller than the screw, but make sure that the blade of the screwdriver can be caught in the triangular gap, and then the screw will be unscrewed by a slight rotation. During the tightening process, the screwdriver can be switched back and forth between the three gaps to avoid applying force to one place and causing damage to the screw slot. However, this is not a long-term solution after all. Using inappropriate tools will not only damage the screws, but also easily hurt yourself. It is recommended to buy a matching screwdriver for use.

There are no Y-shaped screws on the market, and this one needs to be re-molded. After all, screws of this groove type are not common, and they are generally customized for non-standard screw manufacturers. We still have a strong advantage in the customization of this screw, and can be processed according to customer needs. If there is no picture template, we can develop design drawings according to customer requirements and provide satisfactory fastener solutions.

www.junlygroup.com