Knowledge
25
Jun-2023The importance of appearance standards for stamping parts to ensure product q...
Exploring the appearance standard of stamping parts: the key to ensuring product quality. Stamping parts are an important part of modern industrial production, and their appearance standards have a decisive impact on product quality. Therefore, under...22
Jun-2023What is the difference between gold stamping parts and die casting parts
Stamping has many unique advantages both technically and economically; It mainly has the advantages of high production efficiency, convenient operation, and easy mechanization and automation. Die casting is a method of casting die forging. The d...19
Jun-2023Introduction of gold stamping parts and die casting parts
Although they are all metal processing processes, there is a big difference between them: metal stamping is a process that uses punches and molds to deform or break stainless steel, iron, aluminum, copper and other plates and different materials to a...16
Jun-2023Main features of stamping parts
Stamping parts are mainly made of metal or non-metallic plates through stamping dies under the pressure of a press, and mainly have the following characteristics: (1) Stamping parts are stamped under the premise of low material consumption. Its parts...13
Jun-202306
Jan-2023What are the main classifications of CNC machined parts
Simply put (machining) is to use mechanical equipment to process materials, cut materials, and process the required workpiece shape. During the whole process, the shape, size, relative position and properties of the blank form qualified part...03
Jan-2023Problems to be solved when Precision Machined Parts formulates process regula...
5. Determine the machining allowanceMachining allowance: the metal layer removed from the surface of the blank.Total margin: the total margin to be removed from the blank to the finished product.Process allowance: the allowance to be removed in a cer...30
Dec-2022Problems to be solved when Precision Machined Parts formulates process regula...
1. Process analysis of parts, the main contents are:(1) Check whether the drawings of the parts are complete and correct, and analyze whether the accuracy, completeness and technical requirements of the main parts of the parts can be achieved under t...27
Dec-2022Process steps of High Precision CNC Machined Lathe Medical Part
Steps to formulate process regulations The steps to formulate process regulations are roughly as follows:(1) Process analysis of parts;(2) Selection of blank;(3) Selection of positioning datum;(4) Formulation of process route;(5) Select or design and...24
Dec-2022Why High Precision CNC Machined Lathe Medical Part needs to draw up the requi...
Drafting of process regulations The process regulations are technical documents to guide production, and the process regulations must be economical and reasonable.The process specification of the part is the processing method and steps of the part.Co...21
Dec-2022Six-point positioning principle of Stainless Steel Machined Parts workpiece
The principle of workpiece positioningPositioning: During processing, the workpiece must first occupy the correct position.Clamping: After the workpiece is positioned, it is always kept in the correct position so that the workpiece will not be affect...18
Dec-2022Datum Selection Principles of Precision Machining Parts
1. Selection of rough datumIn order to make all the machined surfaces have sufficient machining allowance and ensure that each machined surface has a certain position accuracy to the unmachined surface, the following principles should be followed in ...
Block2 HeShun Road,LouFeng Chuangtou Industrial Workshop, Suzhou SIP
Frank_xi@junlygroup.com
Copyright © SIP Junly Industrial Precision Co., Ltd. All Rights Reserved.